In-Plant Service
For Better Productivity
Micro Products Company
Micro Products Company is a
Manufacturer of Butt Welders
for Wire, Rod & Cable
Steel, Copper, Aluminum,
Brass, Alloys
for over 80 years
Products Micro-Weld Ferrous Butt
& Flash Welders
Micro-Weld Non-Ferrous
Butt Welders
Micro-Weld High Production
Ring Welders
AD Series Welders
Ceramic Fusion Welders SCH Series Cold Pressure
Welders
Ceramic Sleeves Micro-Weld Genuine Parts Resources Special Services & Support Service Manuals Product Brochures Customer FeedbackIf you have recently purchased a Micro-Weld welder, please take a few moments to give us your feedback. Your response will help us serve you better.Take Survey
All Categories > Ferrous Butt & Flash Welders 
 

Ferrous Butt & Flash Welders

Click on a Product to view details.

Request Information
EIS ACMT SEMT Pic

E1S, SEMT and ACMT Steel Fine Wire Butt Welders

 (3)
For Steel wire diameter range: .005” to .062” (.127mm to 1.575mm).

Fine wire needs a fine welder. Micro-Weld welders for steel are the finest available.

Standard features include:
  • Straight slide headpiece (models E1S)
  • Capacitor discharge welding system (model SEMT)
  • Anneal device (models SEMT and ACMT)
  • Adjustable upset pressure
  • Lamp and shear
These fine wire welders have been designed to work harder, last longer and offer continuous operation for excellent quality welds on a consistent basis.


J Series Butt Welders for Steel Rod and Wire

J Series Butt Welders for Steel Wire & Rod

 (5)
Five models for or Steel wire/rod diameter range: .020” to .500” (.51mm to 12.70mm).

Featuring extra heavy-duty transformers, the J Series butt welders are engineered for cost-efficient welding and continuous processing of steel wire and rod products. The extra heavy-duty primary coils and secondaries in the welding transformers make them powerful and long-lasting.

Welders feature:
  • Single operation - quick foot pedal operation activates clamping-upset and electrical circuits automatically
  • Self-aligning welding dies
  • Pivot type welding headpieces
  • Front annealing clamps


GS GT Pic

GS & GT Butt Welders

 (2)
Two models for Steel wire diameter range: .020” to .225” (.51mm to 5.72mm).

Ease of operation, heavy-duty construction and unsurpassable weld quality have all been engineered into these units. Standard features include:
  • Sensitive Straight Slide Movable Welding Headpiece
  • Changeable Welding Dies and Clamp Shoes
  • Annealing devices for both models are available
  • Flash Guards


Model THD pic

Model THD Steel Rod Butt Welder

For Steel rod diameter range: .125” to .500” (.3.18mm to 12.7mm).

THD is an efficient solution to your butt welding needs for steel. Standard Features include:
  • Heavy-duty single phase transformer
  • Straight slide movable welding platens
  • Low voltage safety switch circuits
  • Heavy-duty construction
Optional annealing device, machinist vice, bracket and shears are available.


Model HX Pic

Model HX Steel Rod Butt Welder

For Steel rod diameter range: .125” to .750” (3.18mm to 19.05mm).

Model HX is a heavy-duty welder that offers high quality welds for steel rods. Standard Features include:
  • Straight slide movable welding platens
  • Heavy-duty transformers
  • Heavy-duty pneumatic clamping and upset mechanism
  • Low voltage safety switch circuits
Optional annealing device is available. Micro-Weld also offers machinist vice and shear.


ADX-1 Pic

Model ADX-1 Steel Rod Butt Welder

For Steel rod diameter range: .250” to 1” (6.35 to 25.4mm).

Big performance, small size. Weld your steel wire or rod up to 1” (25.4mm) in diameter in the most cost-effective manner possible, in the toughest work environment, with reliability and consistency. This super heavy-duty Micro-Weld ADX-1 butt welder comes in a compact size to save valuable floor space.

The ADX-1 offers:
  • Weld and anneal in the same plane
  • Super heavy-duty straight slide welding headpiece for superior weld results
  • Compact heavy duty truck design with space saving foot print
  • Separate welding and annealing circuits built in


MD4-5 New Pic

MD-4 and MD-5 Heavy Duty Steel Rod Flash Welders

 (2)
Two models for large Steel rod diameter range: .250” to 1.125” (6.4mm to 28.5mm).

Micro-Weld MD-4 and MD-5 Flash Welders are engineered for cost-efficient, high production, very large diameter steel rod processing. They produce consistently high quality welds uniquely formed under heavy upset pressures delivered by a motor driven cam assembly.

The extra heavy-duty transformer is the most stable and cost-efficient available to steel rod producers and processors today.

MD-4 and MD-5 welders have a convenient control station allowing for easy selection of weld modes, flashing speed and heat selection.

The foot controlled individual clamping pedals allow for easy placement and adjustment ...


MD6 New Pic

MD-6 Heavy Duty Steel Rod Flash Welders

For large Steel rod diameter range: .750” to 1.500” (19.05mm to 38.10mm).

Micro-Weld MD-6 Flash Welders are engineered for cost efficient, high production, very large diameter steel rod processing. They produce consistently high quality welds uniquely formed under heavy upset pressures delivered by a motor driven cam assembly.

The extra heavy-duty transformer is the most stable and cost efficient available to steel rod producers and processors today.

MD-6 welders have a convenient control station allowing for easy selection of weld modes, flashing speed and heat selection.

The foot controlled individual clamping pedals allow for easy placement and adjustment of material position. The ...


JSF Pic

J Series Flat Stock Steel Strip Butt Welders

 (3)
3 Models: From .010” (.25mm) min. thickness & .750” (19.05mm) max. width to .020” (.50mm) min. thickness & 1.25” (31.75mm) max. width

Welders feature:
  • Single operation - quick foot pedal operation activates clamping-upset and electrical circuits automatically
  • Self-aligning welding dies
  • Pivot type welding headpieces
  • Front annealing clamps
  • Extra heavy-duty transformers


MTE1 Pic

MTE-1 Steel Tire Cord Butt Welder

Multiple wire steel strand cord materials, nominal composite size: .021” to .047” diameter (.54mm to 1.191mm).

MTE-1 is a special ceramic fusion butt welder designed and built for use in processing and manufacturing stranded steel tire cord material. A ceramic sleeve acts as a crucible to contain, fuse and join steel tire cord materials. Annealing the weld zone, which is so important when welding high carbon steel cord materials, is easily accomplished on MTE-1 model because of the radiant type anneal device with a large diameter temperature meter.

Additional conventional Micro-Weld welders for welding both rod and wire, .005” to .375” (.127mm to 9.53 mm) diameters, are available to complete ...